Trucks for sale in Saint Albert

We are offering hot shot service for all of alberta. No job is to big or small we try to do them ALL. Trucks from 1/2 ton to 1 ton available. Great RATE S we specialize in oil field hot shots . All our workers have all the safety tickets and appropriate safety gear and tiedowns required for any job. We...

Hitachi UH172 track hoe Just the stick and scrap grapple are left, rest of the unit was scrapped. Powered By TurnkeyWebSolutions.comAlaskan Equipment LTD is a family owned, used equipment and vehicle dealer serving Edmonton, Alberta, Canada. We carry a variety of makes and models, as well as providing used...

WANTED Lead Side Dump Call, text or email with what you have and price/year @(306)229-6066

CALL 780-966-5112 or 1-780-542-1959 VISIT OUR WEBSITE FOR FINANCING Visit the Website and follow the link 2018 2652 Hours PRE EMISSIONS HIGH FLOW Cab Heater Backup Camera Air Conditioning 360 Degree LED Lighting Air Suspension Seat Heated Seat Weatherband Radio Self Levelling Ride Control Selectable ISO Or...

CALL 780-966-5112 or 1-780-542-1959 VISIT OUR WEBSITE FOR FINANCING Visit the Website and follow the link Lugged To Fit John Deere/ Hitachi 50/60 Mini Excavators C/w Hoses And Flat Face Couplers Impulse Force 8,000 Pounds Cycles Per Minute 2,000 Working Weight 1,120 Recommended Carrier Weight 9,000 To...

Selling my 2014 Kenworth T800 with MX 500 DELETED Paccar engine. Still runs strong and if I would be buying new truck would go with Paccar again. 21000 hours 940K. Heavy specs: Few months old 18 B transmission, still under waranty. New clutch. New brake. Trux LED headlights. Recently Inspected. 46K diffs...

New 53' Tridem Flatbed in stock today 5 year Limited Warranty. Hendrickson axles with 5 year greaseless hubs, antipong wood on deck, aluminum toolbox, fixed 3 bar winches, sliding boggie, built for Canadian Hauling. Pipe, Steel, Lumber, in stock today., its Oilfield tough 780-983-7250

CVIP included . 2023 Hyundai Thermotech Reefer Trailers with X4 7300 CARRIER units. Ultra K sliding suspension, polished aluminum rims, 16 inch internal scuff, tire inflation system, factory installed vents, full length exterior rub rail, upper air kit, low roll tires, Galvanized back frame and bumper,...

CALL 780-966-5112 or 1-780-542-1959 VISIT OUR WEBSITE FOR FINANCING Visit the Website and follow the link 24" X 28" Bottom Plate Weight 990 Pounds Impulse Force 990 Pounds C/w John Deere/Hitachi 50/60 Wedge Style Coupler C/w Hoses And Flat Face Couplers Tested & Working $5,995.00

It s that time of year again where winter is approaching . If you re in need of a Flameless heater up to 950 000 to 750 000BTU S with dual outlets give me a ring . They work great for various applications in the oil and gas sector from production equipment to completion work overs, construction projects,...

250KW Diesel Generator c/w fuel tank, light mast, distribution. Other units available as well.

THIS BUMPER CAME OFF A PETE 389 AND THIER IS NO MOUNTING BRACKETS

For sale case 75xt skid steer in good working order no leaks or repairs needed, single speed with manual quick attach. Has brand new tires and just serviced. Cummins 4b engine runs perfect. Machine has 5142 hrs, has heated cab. 20000$

USED TNT 50 series ripper shank to fit Yanmar 55 pin grabber.SUMMER BLOW OUT!! Yard needs to be cleared out before snow falls.We have lots of attachments, new and used. Not the size you are looking for? Let us know we may have it or could custom make it.

NEW TNT 10 series ripper shank to fit JD17 wedge lugging.SUMMER BLOW OUT!! Yard needs to be cleared out before snow falls.We have lots of attachments, new and used. Not the size you are looking for? Let us know we may have it or could custom make it.

USED 30 series EFI ripper shank with 6" wide trenching adaptor, 30 series EFI wedge lugging.SUMMER BLOW OUT!! Yard needs to be cleared out before snow falls.We have lots of attachments, new and used. Not the size you are looking for? Let us know we may have it or could custom make it.

USED 18" 30 series TNT frost bucket, 30 series pin grabber lugging.SUMMER BLOW OUT!! Yard needs to be cleared out before snow falls.We have lots of attachments, new and used. Not the size you are looking for? Let us know we may have it or could custom make it.

Used 36" 30 series EFI dig bucket.SUMMER BLOW OUT!! Yard needs to be cleared out before snow falls.We have lots of attachments, new and used. Not the size you are looking for? Let us know we may have it or could custom make it.

NEW TNT 80 series ripper shank with EFI 80 wedge lugging.SUMMER BLOW OUT!! Yard needs to be cleared out before snow falls.We have lots of attachments, new and used. Not the size you are looking for? Let us know we may have it or could custom make it.

NEW EFI 30 series 30 " clean up bucket to fit 30 series pin grabber.SUMMER BLOW OUT!! Yard needs to be cleared out before snow falls.We have lots of attachments, new and used. Not the size you are looking for? Let us know we may have it or could custom make it.

NEW Kubota KX55 saw tooth ripper shank, KX55 wedge lugging

Kubota U25 TNT ripper with U25 wedge lugging.SUMMER BLOW OUT!! Yard needs to be cleared out before snow falls.We have lots of attachments, new and used. Not the size you are looking for? Let us know we may have it or could custom make it.

USED 24" 30 series EFI dig bucket, EFI 30 series wedge lugging.SUMMER BLOW OUT!! Yard needs to be cleared out before snow falls.We have lots of attachments, new and used. Not the size you are looking for? Let us know we may have it or could custom make it.

New 7.6 litre diesel motor in 2015. PTO and pintle hitch. New tarp and boards. Work ready and looking great. Passed its last CVIP. 260,000 km (13,483 hours).