HLA heavy duty pallet forks. Can be fitted to any q-tach, or pin on loader.1-3/4" x 5" Class III Hook Type Solid Fork Lift Tines7,500 lb. Capacity @ 24" LCC/W Walk through Guard50" Wide Carriage12 Locking Positions for Sliding Adjustable TinesIn stock models listed below.Skidsteer Q-Tach...
HLA heavy duty pallet forks. Can be fitted to any q-tach, or pin on loader.2" x 6" Class III Hook Type Solid Fork Lift Tines10,000 lb. Capacity @ 24" LCC/W Walk through Guard50" Wide Carriage12 Locking Positions for Sliding Adjustable TinesIn stock models listed below.Volvo 50 Q-Tach $3,330For more info...
Tires and hub most fit Raymond dock lifts.
Yellow Fork Lift 1723.9 HRS Details In Pictures
HLA 96 heavy duty low profile skidsteer bucket, with skidsteer quick attach.3/4x6" Beveled Cutting Edge1/4" Material, 1/4" End Plates Reinforced Top Lip34" Deep x 19" HighLower Back, and Longer base Enables Operator to see Cutting Edge of Bucket Reinforced Round Back, and End Plates for Strength, Easy...
HLA 96" heavy duty standard front-end loader material bucket w/84" large utility grapple that fits on ALO/Global quick attach.1/4" Material, 1/4" End Plates3/4 X 6 Bevelled Cutting EdgeReinforced Top Lip30" Deep, 25" HighReinforced Round Back, and End Plates for Strength, Easy Filling, and Clean Out Flat...
S3 Delta Harrow 36 wide Delta cart, single axle frame wheels, hydraulic lift cylinder, and tines.Delta Cart FeaturesTwo-way flexible tines, cold-formed and built to last.Our 5 of tine means more tine for your money. Choose from 7/16 , 1/2 , and 5/8 diameter tines.Our cart frames use a sleeve and...
HLA 5 prong bale spear, used for large square bales, and round bales. Can be fitted to any q-tach, or pin on loader. Comes with 5 49 BPT tines, and 2 14 stabilizer pins. Remove the center tine, and spear will work well for handling 2, or 3 round bales.Frame Width of 88 Frame Height of 74 In stock models...
HLA heavy duty pallet forks. Can be fitted to any q-tach, or pin on loader.1-3/8" x 4" Class II Hook Type Solid Fork Lift Tines4,200 lb. Capacity @ 20" LCC/W Walk through Guard50" Wide Carriage12 Locking Positions for Sliding Adjustable TinesIn stock models listed below.Skidsteer Q-Tach $995Alo/Euro/Global...
HLA heavy duty pallet forks. Can be fitted to any q-tach, or pin on loader.1-1/2" x 4" Class II Hook Type Solid Fork Lift Tines5,500 lb. Capacity @ 24" LCC/W Walk through Guard50" Wide Carriage12 Locking Positions for Sliding Adjustable TinesIn stock models listed below.Skidsteer Q-Tach...
HLA 84" manure fork w/72" skidsteer grapple, with skidsteer quick attach, other hookups available.MFE 35 Conus I Cranked Kverneland TinesFlat Top Acts as Level IndicatorSuperior Penetration66 Skidsteer Grapple IncludedComes with 2- x8 CylindersHose Kit w/Flat Faced Skidsteer Fittings IncludedAlso available...
HLA 8' pallet fork extensions, will fit forks that are smaller than 4.5" wide, and 1.75" tall. For more info contact John 403-553-0000, or by email. Can arrange delivery.
John Deere 8370R FWA tractor with 370hp diesel engine. It has 1,320 hours, and comes with duals. Rear tires 620/70R46, 80% tire tread, front tires 600/70R30, 75% tire tread. IVT transmission (42km/h). Rear 3ph w/quick hitch, and hammer strap drawbar. 1000 1 PTO, dual 855CC, and 35CC hydraulic pumps, and 5...
Kuhn Knight VT 268 680cu ft twin screw vertical mixer. Mixer comes standard with the 2-speed split drive gearbox, with planetary gearboxes, and a torque disconnect. Front cross conveyor with 36" chain, and slat discharge extension with magnet tip off. This unit has 14 19 tungsten coated knives that are in...
3116 CAT engine Manual Transmission Runs Excellent Shifts smooth Good tires Rebuilt engine PTO Dump Body Disk breaks all around hydraulic Well maintained
2015 Kenworth T270 Summit 8 series 11 service body Beautiful clean, used service truck for less than half the price of new. Truck will be emptied out and cleaned up before delivery. - Paccar PX-9 350hp Diesel - Allison 3000 RDS auto transmission - 26,000lb GVWR - Air brakes - Exhaust brake - Locking rear...
HLA 72" ($), 84" ($2,710), 90" ($2,820), & 96" ($3,050) high volume skid steer snow buckets, with skid steer quick attach, other hookups available.3/4x6" Bolt on Reversible Cutting Edge Included3/16" Material, 1/4" End Plates Reinforced Top Lip38" Deep x 32" HighScreened Back for Better...
For sale a yard broadcast spreader w/the skidsteer quick attach. Comes with a single rotor, floating agitator, spinner speed control, manual flow rate adjustment slider & is self-loading. Has a spread width of 3-40 , 5-20 gallon per minute hydraulic flow required, includes hydraulic hoses w/ flat face...
HLA 8' ($6,130), 9' ($) snow blade, with skidsteer quick attach, other hookups available.Spring Trip Cutting Edge30 High MoldboardLateral FloatTwo Angle CylindersHydraulic 35 Angle either DirectionReversible Bolt on Cutting EdgeAdjustable Skid ShoesCross-Over Relief Valve ProtectionHose Kit w/Flat Faced...
HLA 84 ($2,560), 96 ($2,810) snow pushers, with skidsteer quick attach, other hookups available. BACKDRAGS ARE OVER & ABOVE PRICES LISTED, 84 ($560), 96 ($640).30 High30 Deep Fixed EndplatesReversible Bolt on Steel Cutting EdgeAdjustable / Replaceable Skid ShoesFor more info contact John 403-553-0000, or...
HLA 8 ($3,990), 9 ($4,350), 10 ($4,690), 12 ($5,560) snow pushers, with skidsteer quick attach, other hookups available. BACKDRAGS ARE OVER & ABOVE PRICES LISTED, 8 ($670), 9 ($760), 10 ($840), 12 ($970).Spring Trip Cutting Edge38 High36 Deep Fixed EndplatesReversible Bolt on Cutting EdgeAdjustable /...
HLA 10' ($9,170), 12' ($9,850) snow blade, with alo/global quick attach, other hookups available.Spring Trip Cutting Edge34 High MoldboardLateral FloatTwo Angle CylindersHydraulic 35 Angle either DirectionReversible Bolt on Cutting EdgeSkid ShoesCross-Over Relief Valve ProtectionHose Kit w/Pioneer Fittings...
MK Martin LLT-10 10' Land Leveler w/Hydraulic TiltMK Martin 10 land leveler w/10 tilt.Hitch MountHydraulic Lift & Tilt1/4 Mouldboard1/2 x 6 Reversible Cutting Edge1/2 Reversible Adjustable Skid BarsTilt IndicatorTransport Lock10 Jack1,771 Lbs.Crated units available.For more info contact John 403-553-0000,...
MK Martin PRCH72 Skidsteer Rotary Cutter CALL FOR SPRING PRICING!MK Martin 72 skidsteer rough cut mower with skidsteer q-tach. Has a 20-22 GPM hydraulic motor.2 Minimum Cutting Height2 Brush Diameter3 X 3 Blades 3/16 Deck Material Stump Jumper3-Piece Blade AssemblyIntegrated Push BarFront Chain GuardRelief...
Page 1 of 6
Next Page